Online Catalogue

 | 

View Basket | Checkout | Items:, Value:

spacer
spacer

New Products

Snell SA - 2010 Helmets

Snell SA - 2010 Helmets

NOW AVAILABLE SNELL SA-2010 HELMETS

These are our Knight Helmets which are available in White only but with Snell 2010 approval!

This is a plain White helmet with 8 lower vents and 2 adjustable upper vents to aid anti misting.

This helmet is only available in White.

The Helmet is Snell SA-2010 approved.

Our helmets come with a Kevlar fastening strap which is very hard wearing, easy to use and won't fray.

The buckles are also stainless steel.

find out more

£149.00

Westfield Steering Column Cover

Westfield Steering Column Cover

Carbon Effect Plastic Westfield steering column cover. To replace either the aluminium or plastic one you currently have.

find out more

£25.00

Knight Extreme - Hans Helmet

Knight Extreme - Hans Helmet

The Knight Extreme comes with Hans posts as standard. The Helmets all come with FIA approval too 8858 - 2002 Standards, as well as being Snell SA2005 approved

The Knight Extreme is a Full Face Helmet with adjustable top vents as well of plenty of vents to aid anti-misting.

find out more

£229.00

Rally Extreme - Hans Helmet

Rally Extreme - Hans Helmet

The Rally Extreme comes with Hans posts as standard. The Helmets all come with FIA approval too 8858 - 2002 Standards, as well as being Snell SA2005 approved

The Rally Extreme is an Open Face Helmet which comes in a gloss white. It has removable inner padding and a fitted peak with a smoked sun visor.

find out more

£189.00

RaceLidz Speed 3 Layer FIA Approved Suit

RaceLidz Speed 3 Layer FIA Approved Suit

The RaceLidz Speed suit is a 3 Layer FIA approved suit, made to FIA 8856-2000 Standards. The Speed suit is lightweight, extremely comftable and exceptional value for money!

find out more

£250.00

spacer

Best Sellers

RaceLidz Leader Boot

RaceLidz Leader Boot

Lightweight mid cut boot with soft suede upper, soft Nomex inner lining and flame resistant moulded rubber sole, with high grip. Lace and single Velcro closing straps ensure a secure and comfortable fit. MSA and SFI approved.

find out more

£44.95

Snell SA - 2010 Helmets

Snell SA - 2010 Helmets

NOW AVAILABLE SNELL SA-2010 HELMETS

These are our Knight Helmets which are available in White only but with Snell 2010 approval!

This is a plain White helmet with 8 lower vents and 2 adjustable upper vents to aid anti misting.

This helmet is only available in White.

The Helmet is Snell SA-2010 approved.

Our helmets come with a Kevlar fastening strap which is very hard wearing, easy to use and won't fray.

The buckles are also stainless steel.

find out more

£149.00

RaceLidz Pro gloves

RaceLidz Pro gloves

PlaysKool Motorsport is the official distributor of RaceLidz products.

RaceLidz Pro gloves are a 2 layer nomex glove that complies with SFI standard 3.3/5 and is tested and complies with IS0 6940.

The Pro gloves are a stylish glove with finger & thumb suede padding as well as suede padding on the palm. The knuckles are also protected by padding on the back of the glove.

find out more

£29.95

Racelidz Pro Boot

Racelidz Pro Boot

Lightweight high cut boot with soft suede upper, soft Nomex inner lining and flame resistant moulded rubber sole, with high grip. Lace and double Velcro closing straps ensure a secure and comfortable fit. MSA and SFI approved.

find out more

£49.95

Rapfix Racing

Rapfix Racing

The rapfix racing is a new innovative quick release boss that actually allows a quick release boss to be quick to use. This is because unlike typical quick release bosses where splines need to be lined up to get the wheel back on again, the rapfix racing can be placed on in any orientation and when spun finds its original centre point. The rapfix racing does this by using its patented ball bearing system. This system also means that unlike the typical quick release boss where the splines are worn away during use, eventually allowing there to be play in the steering. The ball bearing system however is spring loaded so as any wear takes places the ball bearings take this play up again meaning that the steering remains good and solid all the time. As a result the Rapfix racing quick release boss lasts a lot longer than the typical quick release bosses.
Please watch our video to see the rapfix racing quick release boss in action.

find out more

£185.00

Narrow Body Wheel arch Protector KC-B006 C/F

Narrow Body Wheel arch Protector KC-B006 C/F

Suitable for Narrow body westfields.

Made in Carbon Effect ABS plastic

Kit includes 12 black pop rivets for mounting the arch protectors to the tub.

Price is for a pair including Postage and Packaging.

find out more

£59.99

1225 x 2450 Carbon Effect Plastic 2mm Sheet

1225 x 2450 Carbon Effect Plastic 2mm Sheet

A sheet of Carbon Effect ABS Plastic sheet measuring 1225mm long by 2450mm wide and is 2mm thick.

find out more

£65.00

Rear Anti Rollbar Upgrade

Rear Anti Rollbar Upgrade

Upgrade or replace your front anti-rollbar.

Some rear anti rollbars are renown for snapping.

You can now replace these with our anti-rollbars which aren't welded, which induces weak spots.

To uprgrade from a standard westfield kit all is required is a new bar, two rear mounting blocks and two bar clamping collars.

There is currently a two week waiting list for these.

find out more

£84.99

PlaysKool MSA Approved Lightweight Cage

PlaysKool MSA Approved Lightweight Cage

Playskool MSA Approved cage, is made in a lightweight T45 equivilent material, weighing only 27Kg.

The cage is made to fit Widebody Westfields, and comes complete with door bars and fixing kit.

find out more

£890.00

Front Anti Rollbar uprgrade

Front Anti Rollbar uprgrade

Upgrade or replace your front anti-rollbar.

Some anti rollbars are renown for being too stiff, as a result not working well with the rear anti-rollbar.

You can now replace these with our anti-rollbars which aren't welded, which induces weak spots and the front bar is slightly softer allowing the ability to utilize all of the bar.

To uprgrade from a westfield kit all is required is a new bar, two front mounting blocks and two bar clamping collars.

There is currently a two week waiting list with these.

find out more

£84.99

spacer

Race Logic Traction Control Addons

Online Catalogue | Electronics | Traction Control Units |  Race Logic Traction Control Addons

Rear Traction Wheels

Rear Traction Wheels


Price: £20.00

Quantity:

Rear Sierra drive shafts : 20 teeth, 2mm steel black powder coated, please ask about our fitting service.

Front Traction Wheels

Front Traction Wheels


Price: £20.00

Quantity:

1) Front Cortina disks : 137 mm diameter - 20 teeth, 2mm steel black powder coated, please ask about our fitting service.
2) Front disks : 165 mm diameter - 20 teeth, 2mm steel black powder coated, please ask about our fitting service.

Full Throttle Shift

Full Throttle Shift


Price: £115.00

Quantity:

The full throttle gearshift system is activated by a switch fitted to the clutch pedal, either a hydraulic switch or a mechanical switch. Once the clutch is depressed, the system automatically drops the engine revs down by using a momentary rev-limit, allowing the next gear to be selected without lifting off the throttle. Because the throttle is always fully depressed, the engine is instantly back on full power, and on a turbo car the turbo is still producing boost. Tests have shown up to 0.1 seconds can be gained per gearchange.

Full throttle shift is a firmware upgrade available either at time of purchase or subsequent to fitting.

Set of 4 Wheel Speed Sensors

Set of 4 Wheel Speed Sensors


Price: £322.00

Quantity:

The exact method used to locate and trigger the wheel speed sensors is absolutely critical to the correct operation of the Traction Control System. There are a number of different ways to construct the pick-ups, the easiest being the bolt detection method. The TC system needs a minimum of four pulses per revolution, there is no maximum. There can be a different number of pulses from front to rear, but not between left and right across the same axle. Eg. 34 teeth at the front and 4 teeth at the rear is fine, 34 left front and 4 right front will not work.

The sensor works by detecting the presence of a ferrous trigger point. Mount the sensor at a gap of 1mm from the hub bolts / disc bolts. The head of the bolt must be flat, a cap head will cause a double trigger as it picks up each side of the head. Turn the hub slowly and check the gap never grows bigger than 1mm from any of the bolts. The sensor must be rigidly mounted so no large vibrations occur that will move the sensor head more than 0.8mm away from the reference points and the head must be at 90° to the surface. If a sensing plate / disc is used, it must not be warped or mounted at an angle that would cause the distance between the head and disc to change by more than ±0.5mm. The material used for the reference must be of a ferrous type, if in doubt, check to see if it attracts a magnet. The reference can be painted or plated.


Digital Adjuster including launch Control - Silver finish

Digital Adjuster including launch Control - Silver finish


Price: £207.00

Quantity:

Featuring a backlit LCD screen and simple rotary selector button, packaged with a billet aluminium faceplate, the Digital Adjuster controls slip levels but can also be used as a setup and diagnostic tool, and features many display and configuration options.

Slip levels are adjustable in 1% increments from 0% up to 25%, and launch control comes as standard. Cut level thresholds, rev limits, wheel sizes and RPM operating levels can all be altered in real-time. The display option will represent, in a graph or text format, wheel speeds, RPM, and cut levels. In addition an injector cut feature allows diagnostics to be carried out without the use of a laptop computer.

The adjuster can be added to an existing Traction Control setup as an upgrade, or as an existing component of a new system.



Digital Adjuster including launch Control - Black Anodised finish

Digital Adjuster including launch Control - Black Anodised finish


Price: £218.50

Quantity:

Featuring a backlit LCD screen and simple rotary selector button, packaged with a billet aluminium faceplate, the Digital Adjuster controls slip levels but can also be used as a setup and diagnostic tool, and features many display and configuration options.

Slip levels are adjustable in 1% increments from 0% up to 25%, and launch control comes as standard. Cut level thresholds, rev limits, wheel sizes and RPM operating levels can all be altered in real-time. The display option will represent, in a graph or text format, wheel speeds, RPM, and cut levels. In addition an injector cut feature allows diagnostics to be carried out without the use of a laptop computer.

The adjuster can be added to an existing Traction Control setup as an upgrade, or as an existing component of a new system.



Online Catalogue | Electronics | Traction Control Units |  Race Logic Traction Control Addons

spacer
spacer